Sunrise Metals

Stainless Steel Perforated Sheets – Specifications 1. Material Grades • 304 / 304L – General-purpose, corrosion-resistant • 316 / 316L – Marine and chemical resistant • 430 – Ferritic, magnetic • 310 / 310S – High temperature applications Most commonly used: 304 / 316. ⸻ 2. Sheet Forms • Hot rolled or cold rolled stainless steel sheets • Perforated by punching or laser cutting • Standard flat sheets or coils for roll forming ⸻ 3. Sheet Dimensions • Thickness: 0.5 mm – 12 mm • Width: 914 mm, 1000 mm, 1220 mm, 1250 mm • Length: 2000 mm, 2440 mm, 2500 mm, or custom cut ⸻ 4. Perforation Patterns • Round holes • Square holes • Slotted holes / Rectangular holes • Decorative patterns (customizable) Hole Size: 1 mm – 50 mm (standard) Pitch / Center-to-center distance: 2 mm – 100 mm ⸻ 5. Mechanical Properties (Typical – SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Features • Excellent corrosion and rust resistance • Durable and long-lasting • Can be bent, rolled, or welded • Smooth and uniform perforations • Attractive finish for decorative applications ⸻ 7. Surface Finish • 2B Mill finish • No. 4 Brushed finish • Polished / Mirror finish • Hairline / Decorative finishes ⸻ 8. Applications • Architectural facades and cladding • Ventilation panels and screens • Acoustic panels • Filtration and sieving • Machine guards and safety panels • Decorative furniture and partitions • Chemical and food processing industries

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping.

 Round stainless steel (SS) pipes are widely used for their durability, corrosion resistance, and strength in various applications, from construction to chemical processing. They are available in different grades and sizes to suit specific project needs. Common Stainless Steel GradesThe primary difference between common grades like 304 and 316 is their chemical composition, which impacts performance in specific environments. 

• 304 Stainless Steel: This is the most widely used grade, often called "18/8" due to its 18% chromium and 8% nickel content.
  • Pros: Offers good corrosion resistance in most environments, excellent weldability, and is generally more affordable than 316.
  • Cons: Susceptible to pitting corrosion and stress corrosion cracking when exposed to chlorides or saltwater.
• 316 Stainless Steel: This grade includes the addition of 2-3% molybdenum, which significantly enhances its resistance to corrosion, especially against chlorides and industrial solvents.
  • Pros: Superior resistance in harsh, corrosive environments like marine applications, chemical processing, and medical settings.
  • Cons: Typically more expensive than 304 and slightly harder to form.
• 202 Stainless Steel: A lower-cost alternative to 304, offering decent corrosion resistance but less suitable for highly corrosive environments. 

Product SpecificationsStainless steel round pipes come in various sizes, thicknesses, and finishes. 
Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

1. Material Grades Common stainless steel grades used: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Description • Round discs cut from stainless steel sheets or plates • Available in polished, brushed, or mill finish • Cut-to-size based on diameter requirement ⸻ 3. Thickness Range • 0.5 mm to 10 mm (depends on sheet/plate used) ⸻ 4. Diameter Range • 50 mm to 1500 mm (custom diameters available) ⸻ 5. Surface Finish • 2B / Mill finish: Smooth and reflective • No. 4 / Brushed: Satin finish • BA / Bright Annealed: Mirror finish • HL / Hairline: Decorative brushed finish ⸻ 6. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 7. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 8. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades • Easy to clean and maintain • Long-lasting, suitable for indoor and outdoor applications ⸻ 9. Applications • Kitchenware (plates, trays, utensil blanks) • Decorative panels and medallions • Industrial components and machinery parts • Automotive and aerospace parts • Electrical and instrumentation components • Food processing and pharmaceutical equipment

1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Description • Flat, rectangular cross-section bars • Available in hot rolled or cold rolled • Surface finish: Mill, polished, brushed (No. 4), bright (BA) ⸻ 3. Size Range • Width: 10 mm to 300 mm • Thickness: 3 mm to 50 mm • Length: Standard 3 meters, 6 meters, or cut-to-size ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 5. Surface Finish • Mill Finish (2B) – Smooth, standard cold-rolled finish • No. 4 / Brushed – Satin finish • BA (Bright Annealed) – Mirror finish • HL / Hairline – Decorative finish ⸻ 6. Features • Excellent corrosion resistance • Strong and durable • Non-magnetic for austenitic grades (304/316) • Easy to cut, weld, and fabricate • Long service life for indoor and outdoor use ⸻ 7. Applications • Structural supports and frames • Fabrication of machinery and equipment • Decorative and architectural elements • Marine and chemical structures • Food processing and pharmaceutical equipment • Automotive and aerospace components • Electrical panels and instrumentation

Stainless Steel Seamless Pipes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 321 – Heat resistant, for high temperature and pressure • 904L – Highly corrosion resistant for chemical industries Most commonly used: 304 / 316. ⸻ 2. Pipe Description • Seamless construction: made from solid stainless steel billets, no welding • Higher strength and pressure handling than welded pipes • Smooth inner surface, suitable for fluid transport ⸻ 3. Dimensions • Outer Diameter (OD): 6 mm – 600 mm (custom sizes possible) • Wall Thickness: 1 mm – 50 mm • Length: Standard 6 meters (custom cut lengths available) Standards: • ASTM A312, A213, A269, ASME SA213 • ISO 1127 / EN 10216-5 ⸻ 4. Surface Finish • Mill finish (2B) – Standard smooth finish • Polished / Bright (BA) – Mirror finish • Pickled & Passivated – Corrosion resistant, hygienic • Brushed (No. 4 / HL) – Decorative or architectural use ⸻ 5. Mechanical Properties (Typical for SS 304 Seamless Pipe) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 grade additionally contains Molybdenum (2–3%) for improved chloride corrosion resistance. ⸻ 7. Features • Seamless, high strength, can handle high pressure • Excellent corrosion resistance • Smooth inner surface ideal for sanitary and chemical applications • Can be welded, bent, or machined • Long service life for indoor and outdoor use ⸻ 8. Applications • Chemical and petrochemical industries • Oil and gas pipelines • Food and pharmaceutical processing • High-pressure boilers and heat exchangers • Marine and shipbuilding applications • Structural and mechanical engineering • Hydraulic and pneumatic systems

Stainless Steel Seamless Pipes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 321 – Heat resistant, for high temperature and pressure • 904L – Highly corrosion resistant for chemical industries Most commonly used: 304 / 316. ⸻ 2. Pipe Description • Seamless construction: made from solid stainless steel billets, no welding • Higher strength and pressure handling than welded pipes • Smooth inner surface, suitable for fluid transport ⸻ 3. Dimensions • Outer Diameter (OD): 6 mm – 600 mm (custom sizes possible) • Wall Thickness: 1 mm – 50 mm • Length: Standard 6 meters (custom cut lengths available) Standards: • ASTM A312, A213, A269, ASME SA213 • ISO 1127 / EN 10216-5 ⸻ 4. Surface Finish • Mill finish (2B) – Standard smooth finish • Polished / Bright (BA) – Mirror finish • Pickled & Passivated – Corrosion resistant, hygienic • Brushed (No. 4 / HL) – Decorative or architectural use ⸻ 5. Mechanical Properties (Typical for SS 304 Seamless Pipe) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 grade additionally contains Molybdenum (2–3%) for improved chloride corrosion resistance. ⸻ 7. Features • Seamless, high strength, can handle high pressure • Excellent corrosion resistance • Smooth inner surface ideal for sanitary and chemical applications • Can be welded, bent, or machined • Long service life for indoor and outdoor use ⸻ 8. Applications • Chemical and petrochemical industries • Oil and gas pipelines • Food and pharmaceutical processing • High-pressure boilers and heat exchangers • Marine and shipbuilding applications • Structural and mechanical engineering • Hydraulic and pneumatic systems

SS Slotted Pipe is a stainless steel pipe/tube with precision slots cut along its length. It is designed to allow controlled flow, drainage, filtration, or ventilation while maintaining structural strength and corrosion resistance.

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

A Stainless Steel Channel is a U-shaped or C-shaped structural section used where strength, corrosion resistance, hygiene, and long service life are required. SS channels are widely used in industrial, architectural, and fabrication works.

Jindal Stainless Steel Sheets are high-quality flat products produced by Jindal Stainless, a leading manufacturer in the stainless steel industry. Renowned for their exceptional durability and corrosion resistance, these sheets are widely used in diverse applications ranging from architectural design to industrial processes.
Manufactured from premium stainless steel alloys, such as grades 304 and 316, Jindal sheets offer superior resistance to rust, stains, and high temperatures. Grade 304 is ideal for general-purpose use, providing excellent resistance to oxidation and ease of fabrication. Grade 316, with added molybdenum, is particularly suited for environments with high salinity or chemical exposure, such as marine or chemical processing industries.
Jindal Stainless Steel Sheets come in various thicknesses, widths, and finishes, including brushed, mirrored, and embossed surfaces. This versatility makes them suitable for a wide array of applications, from kitchen countertops and appliances to architectural facades and industrial equipment. The sheets are available in both hot-rolled and cold-rolled forms, allowing for precise customization based on specific project requirements.
Additionally, Jindal's commitment to quality ensures that each sheet adheres to rigorous standards and certifications, offering reliability and performance. The company employs advanced manufacturing processes and technologies to maintain consistent quality and meet global standards.
In summary, Jindal Stainless Steel Sheets are a top choice for those seeking durable, aesthetically pleasing, and versatile stainless steel solutions. Their robust performance and wide range of options make them ideal for both decorative and functional uses.

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless steel pipes are durable, corrosion-resistant tubes widely used in various industries, including construction, automotive, and manufacturing. They are made from a mix of iron, chromium, and sometimes nickel, which gives them their exceptional resistance to rust and staining. These pipes come in various grades, with the most common being 304 and 316, each offering different levels of corrosion resistance and strength.
304 stainless steel pipes are ideal for general-purpose applications due to their excellent resistance to oxidation and a variety of chemicals. On the other hand, 316 stainless steel pipes contain molybdenum, providing superior resistance to chloride environments, making them suitable for marine or highly acidic settings.
Available in a range of sizes and thicknesses, stainless steel pipes are known for their high tensile strength, aesthetic appearance, and ease of maintenance. They can be easily welded or joined, making them versatile for different piping systems. Additionally, their smooth surface ensures minimal friction loss and a hygienic environment, which is crucial in industries like food processing and pharmaceuticals. Overall, stainless steel pipes offer a reliable and long-lasting solution for both structural and fluid handling needs.

Stainless Steel Wire – Specifications 1. Material Grades Common grades of stainless steel wire: • 304 / 304L – General purpose, good corrosion resistance • 316 / 316L – Marine and chemical resistant • 302 / 302HQ – High tensile strength • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most widely used: 304 / 316. ⸻ 2. Forms Available • Coil Wire – Hot or cold drawn • Straightened Wire – Cut-to-length for industrial use • Galvanized or Coated Wire (optional) • Braided Wire / Cable ⸻ 3. Diameter Range • 0.2 mm to 12 mm (custom sizes available) ⸻ 4. Mechanical Properties (Typical – 304 Wire) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 5. Surface Finish • Bright / Mirror finish • Mill finish • Polished or drawn • Coated (PVC / Nylon) for special applications ⸻ 6. Features • Excellent corrosion and rust resistance • Good flexibility and tensile strength • Easy to form, braid, or weave • Non-magnetic (austenitic grades) • Long service life for indoor and outdoor use ⸻ 7. Applications • Industrial spring wire • Fencing and security mesh • Cable and rope manufacture • Automotive components • Medical and surgical instruments • Electrical and electronics applications • Construction and architectural use

Stainless Steel Square Baris a solid square cross-section bar made from stainless steel. It is widely used where strength, corrosion resistance, precision, and durability are required.

SS Wire Mesh is made from stainless steel wires woven or welded into uniform openings. It is widely used for filtration, screening, protection, ventilation, and architectural purposes due to its strength and corrosion resistance.

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Jindal Stainless Steel Sheets are high-quality flat products produced by Jindal Stainless, a leading manufacturer in the stainless steel industry. Renowned for their exceptional durability and corrosion resistance, these sheets are widely used in diverse applications ranging from architectural design to industrial processes.
Manufactured from premium stainless steel alloys, such as grades 304 and 316, Jindal sheets offer superior resistance to rust, stains, and high temperatures. Grade 304 is ideal for general-purpose use, providing excellent resistance to oxidation and ease of fabrication. Grade 316, with added molybdenum, is particularly suited for environments with high salinity or chemical exposure, such as marine or chemical processing industries.
Jindal Stainless Steel Sheets come in various thicknesses, widths, and finishes, including brushed, mirrored, and embossed surfaces. This versatility makes them suitable for a wide array of applications, from kitchen countertops and appliances to architectural facades and industrial equipment. The sheets are available in both hot-rolled and cold-rolled forms, allowing for precise customization based on specific project requirements.
Additionally, Jindal's commitment to quality ensures that each sheet adheres to rigorous standards and certifications, offering reliability and performance. The company employs advanced manufacturing processes and technologies to maintain consistent quality and meet global standards.
In summary, Jindal Stainless Steel Sheets are a top choice for those seeking durable, aesthetically pleasing, and versatile stainless steel solutions. Their robust performance and wide range of options make them ideal for both decorative and functional uses.

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, austenitic • 316 / 316L – Marine and chemical resistant, austenitic • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316 for outdoor and corrosive environments. ⸻ 2. Types • Equal Angles: Both legs are equal in length • Unequal Angles: Legs have different lengths • Hot Rolled / Cold Rolled • Mill Finish / Polished Finish ⸻ 3. Size Range Equal Angles (L x L x Thickness): • 20 x 20 x 3 mm up to 150 x 150 x 20 mm • Standard length: 3 m, 6 m, or cut-to-size Unequal Angles (L1 x L2 x Thickness): • 30 x 20 x 3 mm up to 150 x 100 x 20 mm Tolerance: ±0.5 mm ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 5. Surface Finish • Mill finish (as rolled) • Brushed / Satin finish (No. 4) • Polished / Mirror finish (BA) • Hairline finish for decorative applications ⸻ 6. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades 304/316) • Long service life • Strong and durable for structural and architectural use • Easy to weld, cut, and fabricate ⸻ 7. Applications • Structural frames and supports • Architectural facades and handrails • Marine and chemical structures • Food processing equipment • Machinery and equipment fabrication • Decorative and interior applications • Industrial and civil construction

Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, austenitic • 316 / 316L – Marine and chemical resistant, austenitic • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316 for outdoor and corrosive environments. ⸻ 2. Types • Equal Angles: Both legs are equal in length • Unequal Angles: Legs have different lengths • Hot Rolled / Cold Rolled • Mill Finish / Polished Finish ⸻ 3. Size Range Equal Angles (L x L x Thickness): • 20 x 20 x 3 mm up to 150 x 150 x 20 mm • Standard length: 3 m, 6 m, or cut-to-size Unequal Angles (L1 x L2 x Thickness): • 30 x 20 x 3 mm up to 150 x 100 x 20 mm Tolerance: ±0.5 mm ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 5. Surface Finish • Mill finish (as rolled) • Brushed / Satin finish (No. 4) • Polished / Mirror finish (BA) • Hairline finish for decorative applications ⸻ 6. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades 304/316) • Long service life • Strong and durable for structural and architectural use • Easy to weld, cut, and fabricate ⸻ 7. Applications • Structural frames and supports • Architectural facades and handrails • Marine and chemical structures • Food processing equipment • Machinery and equipment fabrication • Decorative and interior applications • Industrial and civil construction

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Description • Flat, rectangular cross-section bars • Available in hot rolled or cold rolled • Surface finish: Mill, polished, brushed (No. 4), bright (BA) ⸻ 3. Size Range • Width: 10 mm to 300 mm • Thickness: 3 mm to 50 mm • Length: Standard 3 meters, 6 meters, or cut-to-size ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 5. Surface Finish • Mill Finish (2B) – Smooth, standard cold-rolled finish • No. 4 / Brushed – Satin finish • BA (Bright Annealed) – Mirror finish • HL / Hairline – Decorative finish ⸻ 6. Features • Excellent corrosion resistance • Strong and durable • Non-magnetic for austenitic grades (304/316) • Easy to cut, weld, and fabricate • Long service life for indoor and outdoor use ⸻ 7. Applications • Structural supports and frames • Fabrication of machinery and equipment • Decorative and architectural elements • Marine and chemical structures • Food processing and pharmaceutical equipment • Automotive and aerospace components • Electrical panels and instrumentation

1. Material Grades Common stainless steel grades used: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Description • Round discs cut from stainless steel sheets or plates • Available in polished, brushed, or mill finish • Cut-to-size based on diameter requirement ⸻ 3. Thickness Range • 0.5 mm to 10 mm (depends on sheet/plate used) ⸻ 4. Diameter Range • 50 mm to 1500 mm (custom diameters available) ⸻ 5. Surface Finish • 2B / Mill finish: Smooth and reflective • No. 4 / Brushed: Satin finish • BA / Bright Annealed: Mirror finish • HL / Hairline: Decorative brushed finish ⸻ 6. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 7. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 8. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades • Easy to clean and maintain • Long-lasting, suitable for indoor and outdoor applications ⸻ 9. Applications • Kitchenware (plates, trays, utensil blanks) • Decorative panels and medallions • Industrial components and machinery parts • Automotive and aerospace parts • Electrical and instrumentation components • Food processing and pharmaceutical equipment

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Stainless Steel Round Bars – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – General purpose, excellent corrosion resistance • 316 / 316L – Marine and chemical resistant • 202 / 201 – Economical alternative • 310 / 310S – High temperature • 410 / 420 – Martensitic, can be hardened • 430 – Ferritic, magnetic Most common: 304 and 316. ⸻ 2. Product Forms • Hot Rolled (HR) • Cold Drawn (CD) • Centerless Ground • Polished (bright finish) ⸻ 3. Size Range • Diameter: 3 mm to 400 mm • Length: Standard 3 meters / 6 meters • Cut-to-size available ⸻ 4. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 (Properties vary by grade.) ⸻ 5. Chemical Composition (Typical – SS 304) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% 316 grade also includes 2–3% Molybdenum for better corrosion resistance. ⸻ 6. Surface Finishes • Black (HR) • Bright / Polished • Peeled / Turned • Ground (precise dimension) ⸻ 7. Features • Corrosion and heat resistant • High strength with good machinability • Easy to weld and fabricate • Long service life indoors and outdoors • Non-magnetic in austenitic grades (304/316) ⸻ 8. Applications • Shafts and fasteners • Marine and chemical equipment • Food and pharmaceutical machinery • Automotive and pump components • Decorative and architectural work • Instrumentation and precision parts

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless Steel Square Pipe / Tube A stainless steel square pipe is a hollow square-shaped tube made from corrosion-resistant stainless steel. It offers clean appearance, high durability and strength, which makes it suitable for architectural, industrial and fabrication applications. The smooth finish and accurate dimensions make it easy to weld, polish and fabricate. Common Grades • SS 304 • SS 316 • SS 202 (economic option) Typical Sizes • 12 mm to 150 mm square • Thickness: 0.8 mm to 5 mm • Length: usually 6 meters Key Features • Excellent corrosion resistance • Strong and lightweight • Good weldability and formability • Uniform dimensions and smooth finish Common Uses • Railings and handrails • Furniture and decorative structures • Architectural fabrication • General engineering • Industrial frames and supports

Stainless Steel Sheets, Plates & Coils – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Most widely used, corrosion resistant, good formability • 316 / 316L – Marine grade, higher corrosion resistance (chlorides) • 310 / 310S – High-temperature applications • 430 – Ferritic, magnetic, corrosion resistant, cost-effective • 201 / 202 – Lower nickel content, economical alternative ⸻ 2. Product Forms 1. Sheets – Flat pieces, cut-to-size 2. Plates – Thick sheets, heavy duty applications 3. Coils – Continuous rolled sheet, for further processing (cutting, fabrication) ⸻ 3. Thickness Range • Sheets: 0.3 mm – 6 mm • Plates: 6 mm – 100 mm or more • Coils: 0.3 mm – 3 mm (standard coil thickness) ⸻ 4. Width & Length • Sheets / Plates: • Width: 1000 mm, 1219 mm, 1500 mm, 2000 mm • Length: 2000 mm, 2440 mm, 3000 mm • Coils: • Width: 1000 mm, 1219 mm, 1500 mm • Outer Diameter: Up to 1500 mm, weight up to 10 tons Custom sizes available on request. ⸻ 5. Surface Finish • 2B Finish: Standard cold-rolled finish, smooth and reflective • No. 1 / Hot Rolled Finish: Rough, matte finish • No. 4 Finish: Brushed, satin finish • BA (Bright Annealed): Mirror finish • HL (Hairline): Decorative brushed finish ⸻ 6. Mechanical Properties Typical values for 304 Stainless Steel: • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 Properties vary with alloy and temper. ⸻ 7. Chemical Composition 304 SS (approx.): • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% 316 SS adds Mo (Molybdenum) 2–3% for chloride resistance. ⸻ 8. Features • Excellent corrosion resistance • Non-magnetic (austenitic grades) • High strength-to-weight ratio • Heat and temperature resistance (depending on grade) • Easy to clean and maintain • Long service life ⸻ 9. Applications • Kitchen equipment and appliances • Food processing and pharmaceutical equipment • Chemical and petrochemical industries • Architectural cladding and panels • Automotive and aerospace components • Marine equipment (316 grade) • Heat exchangers and storage tanks • Industrial machinery and piping

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications

Stainless Steel Pipes & Tubes – Specifications 1. Material Grades Common stainless steel grades: • 304 / 304L – Standard corrosion resistance, widely used • 316 / 316L – Marine and chemical resistant • 310 / 310S – High temperature applications • 430 – Ferritic, magnetic, corrosion resistant • 202 / 201 – Economical alternative Most commonly used: 304 and 316. ⸻ 2. Product Forms • Round Pipes / Tubes – Circular cross-section, for fluid transport and structural use • Square Tubes – Square cross-section, mainly for structural and architectural use • Rectangular Tubes – Rectangular cross-section, structural applications ⸻ 3. Dimensions Round Pipes • Outer Diameter (OD): 6 mm – 600 mm • Wall Thickness: 0.5 mm – 25 mm • Length: Standard 6 meters, cut-to-size available Square / Rectangular Tubes • Size: 12x12 mm – 200x100 mm • Wall Thickness: 1 mm – 10 mm • Length: 6 meters standard ⸻ 4. Surface Finish • Mill Finish (2B): Smooth, standard cold-rolled finish • Polished / Bright (BA): Mirror finish • Brushed (No. 4 / HL): Satin decorative finish • Electropolished: For high hygiene applications ⸻ 5. Mechanical Properties (Typical for SS 304) • Tensile Strength: 520–750 MPa • Yield Strength: 215–505 MPa • Elongation: 40–60% • Hardness: HRB 70–95 ⸻ 6. Chemical Composition (SS 304 Approx.) • Chromium (Cr): 18–20% • Nickel (Ni): 8–10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 1% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% ⸻ 7. Features • Excellent corrosion resistance • High strength and durability • Non-magnetic for austenitic grades (304/316) • Easy to weld, bend, and fabricate • Suitable for indoor and outdoor applications • Long service life ⸻ 8. Applications • Piping for water, oil, and gas • Chemical, pharmaceutical, and food processing industries • Structural and architectural applications • Automotive and aerospace components • Marine and shipbuilding applications • Heat exchangers and condensers • Electrical and instrumentation applications