Sunrise Metals

Mild steel angles are versatile structural components commonly used in construction and fabrication projects. Made from low-carbon steel, these angles are known for their ductility, weldability, and cost-effectiveness. They typically have an L-shaped cross-section, with equal or unequal legs, and are available in various sizes and thicknesses to meet different structural requirements.
Mild steel angles are used to provide support, reinforcement, and stability in various applications, such as framing, brackets, and structural supports. Their inherent strength allows them to withstand significant loads and stresses, making them suitable for both indoor and outdoor use. Additionally, mild steel angles are easy to cut, weld, and drill, facilitating their integration into custom designs and structures.
While they offer good strength and versatility, mild steel angles are prone to corrosion if exposed to harsh environmental conditions. To mitigate this, they are often coated with protective finishes or paint. In summary, mild steel angles are essential for a wide range of structural applications, combining strength, ease of use, and affordability.

Mild Steel Angle – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 1239 standard • Hot rolled or cold rolled ⸻ 2. Types of MS Angles • Equal Angle: Both legs are of same length • Unequal Angle: Legs have different lengths • Hot Rolled Angle • Cold Rolled Angle ⸻ 3. Size Range Equal Angles (L x L x Thickness) • 25 x 25 x 3 mm up to 150 x 150 x 20 mm • Standard lengths: 6 meters or 12 meters Unequal Angles (L1 x L2 x Thickness) • 25 x 20 x 3 mm up to 150 x 100 x 20 mm • Standard length: 6 meters Tolerance: • Length: ±5 mm • Thickness: ±0.3 mm • Width: ±0.5 mm ⸻ 4. Mechanical Properties (Typical for IS 2062 / Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 Good ductility and weldability. ⸻ 5. Surface Finish • Hot rolled: Matte grey • Cold rolled: Smooth finish • Can be painted or coated • ISI marked angles available for quality assurance ⸻ 6. Features • High strength-to-weight ratio • Easy to weld, cut, and fabricate • Uniform cross-section • Durable for construction and structural applications • Available in both standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports) • Bridges and industrial structures • Roof trusses and staircases • Conveyor frames and machinery • Fencing and grills • Electrical and telecommunication towers • General engineering and construction work

Mild Steel Sheets & Plates – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 513 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Thickness Range Sheets • 0.5 mm to 6 mm Plates • 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm ⸻ 3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available. ⸻ 4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 ⸻ 5. Surface Finish • Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻ 6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

Mild Steel Sheets & Plates – Specifications
1. Material • Mild Steel (Low Carbon Steel) •
Grade: IS 2062 / IS 513 / IS 1239
• Hot rolled or cold rolled ⸻ 2.
Thickness Range Sheets
• 0.5 mm to 6 mm Plates
• 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm
3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available.
4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25%
• Hardness: HRB 60–80 ⸻ 5. Surface Finish
• Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻
6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

MS Round Bars – Specifications 1. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 / E350 • EN8 (C45) – Medium carbon, higher strength (on request) Standard MS round bars are usually IS 2062 E250. ⸻ 2. Size Range • Diameter: 6 mm to 200 mm • Length: Standard 6 meters • Cut-to-size available Types available: • Hot Rolled (HR) • Cold Drawn (CD) • Bright Bars (for precision use) ⸻ 3. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: Minimum 23% • Good ductility and weldability ⸻ 4. Features • Easy to weld and machine • Uniform diameter and straightness • Strong and durable for structural use • Suitable for machining, threading, and fabrication • Cost-effective material for general engineering ⸻ 5. Applications • Shafts and pins • Machine parts and components • Construction and fabrication • Automobiles and trailers • Furniture and fabrication work • Industrial equipment • Agricultural machinery

MS Round Bars – Specifications 1. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 / E350 • EN8 (C45) – Medium carbon, higher strength (on request) Standard MS round bars are usually IS 2062 E250. ⸻ 2. Size Range • Diameter: 6 mm to 200 mm • Length: Standard 6 meters • Cut-to-size available Types available: • Hot Rolled (HR) • Cold Drawn (CD) • Bright Bars (for precision use) ⸻ 3. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: Minimum 23% • Good ductility and weldability ⸻ 4. Features • Easy to weld and machine • Uniform diameter and straightness • Strong and durable for structural use • Suitable for machining, threading, and fabrication • Cost-effective material for general engineering ⸻ 5. Applications • Shafts and pins • Machine parts and components • Construction and fabrication • Automobiles and trailers • Furniture and fabrication work • Industrial equipment • Agricultural machinery

Mild Steel Channel – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grades: IS 2062 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Types of Channels • C Channel / U Channel – Standard open-side channel • Standard Duty / Heavy Duty – Depending on thickness and application • Hot rolled channels are common for construction • Cold rolled channels are smoother and suitable for indoor or light-duty applications

Mild Steel Sheets & Plates – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 513 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Thickness Range Sheets • 0.5 mm to 6 mm Plates • 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm ⸻ 3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available. ⸻ 4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 ⸻ 5. Surface Finish • Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻ 6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills

Mild Steel Beams – Specifications 1. Product Types MS beams are available in these sections: • ISMB – Indian Standard Medium Beam • ISLB – Indian Standard Light Beam • ISWB – Indian Standard Wide Flange Beam • ISHB / H-Beam – Heavy Beam (wide and heavy design) • I-Beam / Universal Beam – Structural applications ⸻ 2. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 • IS 2062 Grade E350 These grades give good weldability and strength. ⸻ 3. Dimensions (General Range) Depth (Height) • 100 mm to 600 mm (varies by beam type) Flange Width • 50 mm to 250 mm Web Thickness • 4 mm to 12 mm Flange Thickness • 6 mm to 20 mm Length • Standard: 6 meters / 12 meters • Custom cut lengths available ⸻ 4. Weight Range MS beams are sold by weight. Typical weight range: • 5 kg/m to 110 kg/m, depending on size and type. (I can also prepare a full size-wise weight chart if needed.) ⸻ 5. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: 23% minimum • Good ductility and weldability ⸻ 6. Features • Strong structural load-bearing capacity • Good weldability and machinability • Suitable for fabrication and construction • Durable and long-lasting even in outdoor conditions • Cost-effective compared to heavy alloy steels ⸻ 7. Applications • Building structures • Bridges and flyovers • Industrial sheds and warehouses • Machinery frames • Supporting columns and trusses • Shipbuilding and heavy engineering • Transport and equipment manufacturing

Mild Steel Sheets & Plates – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 513 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Thickness Range Sheets • 0.5 mm to 6 mm Plates • 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm ⸻ 3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available. ⸻ 4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 ⸻ 5. Surface Finish • Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻ 6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills

Mild Steel Flat Bars – Specifications 1. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 / E350 Good strength and excellent weldability. ⸻ 2. Size Range Width • 12 mm to 300 mm Thickness • 3 mm to 25 mm Length • Standard: 6 meters • Custom cut lengths available ⸻ 3. Types • Hot Rolled (HR) Flat • Cold Drawn (CD) Flat • Bright Flat (for precision applications) ⸻ 4. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: Minimum 23% ⸻ 5. Features • Strong and durable • Excellent weldability • Easy to cut, bend, and fabricate • Uniform thickness and straight edges • Cost-effective structural material ⸻ 6. Applications • Construction and fabrication • Base plates and brackets • Machine frames • Industrial sheds and support structures • Gratings and railings • General engineering work • Automobile and equipment manufacturing

Mild Steel Flat Bars – Specifications 1. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 / E350 Good strength and excellent weldability. ⸻ 2. Size Range Width • 12 mm to 300 mm Thickness • 3 mm to 25 mm Length • Standard: 6 meters • Custom cut lengths available ⸻ 3. Types • Hot Rolled (HR) Flat • Cold Drawn (CD) Flat • Bright Flat (for precision applications) ⸻ 4. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: Minimum 23% ⸻ 5. Features • Strong and durable • Excellent weldability • Easy to cut, bend, and fabricate • Uniform thickness and straight edges • Cost-effective structural material ⸻ 6. Applications • Construction and fabrication • Base plates and brackets • Machine frames • Industrial sheds and support structures • Gratings and railings • General engineering work • Automobile and equipment manufacturing

MS Coil (Mild Steel Coil) An MS coil is a flat steel sheet rolled into a coil form. It’s made from low-carbon mild steel, which makes it easy to cut, bend and weld. These coils are widely used in fabrication, construction, automotive parts, general engineering and sheet-metal work. Common Features • Thickness: usually 0.8 mm to 20 mm • Width: 1000 mm, 1250 mm, 1500 mm (varies by mill) • Finish: hot rolled or cold rolled • Properties: good weldability, good formability, strong and durable Common Uses • Panels and fabrication jobs • Machine parts • Automotive components • Structural and industrial applications • Door frames, brackets, general sheet cutting

A mild steel square bar is a solid square-shaped bar made from low-carbon steel. It’s easy to weld, cut and machine, which makes it suitable for a wide range of fabrication and engineering work. The material offers good strength and durability for both structural and general-purpose applications. Common Sizes • 6 mm to 100 mm square • Length: usually 6 meters Key Features • Low carbon content for easier fabrication • Good weldability and machinability • Strong and long-lasting • Uniform square cross-section Typical Uses • Grills and gates • Frames and supports • Hardware parts • Machined components • Construction and industrial applications

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

Mild Steel Beams – Specifications 1. Product Types MS beams are available in these sections: • ISMB – Indian Standard Medium Beam • ISLB – Indian Standard Light Beam • ISWB – Indian Standard Wide Flange Beam • ISHB / H-Beam – Heavy Beam (wide and heavy design) • I-Beam / Universal Beam – Structural applications ⸻ 2. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 • IS 2062 Grade E350 These grades give good weldability and strength. ⸻ 3. Dimensions (General Range) Depth (Height) • 100 mm to 600 mm (varies by beam type) Flange Width • 50 mm to 250 mm Web Thickness • 4 mm to 12 mm Flange Thickness • 6 mm to 20 mm Length • Standard: 6 meters / 12 meters • Custom cut lengths available ⸻ 4. Weight Range MS beams are sold by weight. Typical weight range: • 5 kg/m to 110 kg/m, depending on size and type. (I can also prepare a full size-wise weight chart if needed.) ⸻ 5. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: 23% minimum • Good ductility and weldability ⸻ 6. Features • Strong structural load-bearing capacity • Good weldability and machinability • Suitable for fabrication and construction • Durable and long-lasting even in outdoor conditions • Cost-effective compared to heavy alloy steels ⸻ 7. Applications • Building structures • Bridges and flyovers • Industrial sheds and warehouses • Machinery frames • Supporting columns and trusses • Shipbuilding and heavy engineering • Transport and equipment manufacturing

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

Mild Steel Pipes – Specifications 1. Material • Low carbon steel (Mild Steel) • Grades commonly used: • IS 1239 (Part 1) – Medium & Heavy class pipes • IS 3589 – Large diameter pipes • IS 1161 – Structural pipes • IS 3601 – General purpose pipes • IS 2062 – Plates/coils for ERW pipes ⸻ 2. Manufacturing Types ERW Pipes (Electric Resistance Welded) • Most common • Smooth weld seam Seamless Pipes • Used for high pressure, precision applications Hollow Sections • Square and rectangular MS pipes (structural) ⸻ 3. Size Range Round Pipes • Outer Diameter: 15 mm to 500 mm • Thickness: 1 mm to 12 mm • Length: 6 meters standard Square Pipes • Sizes: 12x12 mm to 300x300 mm • Thickness: 1 mm to 12 mm Rectangular Pipes • Sizes: 20x10 mm to 300x200 mm • Thickness: 1 mm to 12 mm ⸻ 4. Classifications as per IS 1239 • Light Class (A) • Medium Class (B) • Heavy Class (C) Heavier class means higher thickness and pressure capacity. ⸻ 5. Mechanical Properties (Typical values for IS 2062 / ERW MS pipes) • Yield Strength: 240–260 MPa • Tensile Strength: 350–410 MPa • Elongation: 20–24% • Good weldability and formability ⸻ 6. Chemical Composition (Approx.) • Carbon: 0.15% max • Manganese: 0.60% max • Sulphur: 0.04% max • Phosphorus: 0.04% max • Silicon: 0.15% max Low carbon = easy to weld, bend and fabricate. ⸻ 7. Surface Finish • Black finish (Mill finish) • Sometimes oiled to prevent rust • Smooth outside and inside • Weld seam visible in ERW pipes ⸻ 8. Applications • Construction and structural work • Furniture • Gates and grills • Water supply lines • Scaffolding • Automobiles • General fabrication • Industrial and mechanical supports • Agricultural equipment

Mild Steel Flat Bars – Specifications 1. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 / E350 Good strength and excellent weldability. ⸻ 2. Size Range Width • 12 mm to 300 mm Thickness • 3 mm to 25 mm Length • Standard: 6 meters • Custom cut lengths available ⸻ 3. Types • Hot Rolled (HR) Flat • Cold Drawn (CD) Flat • Bright Flat (for precision applications) ⸻ 4. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: Minimum 23% ⸻ 5. Features • Strong and durable • Excellent weldability • Easy to cut, bend, and fabricate • Uniform thickness and straight edges • Cost-effective structural material ⸻ 6. Applications • Construction and fabrication • Base plates and brackets • Machine frames • Industrial sheds and support structures • Gratings and railings • General engineering work • Automobile and equipment manufacturing

Mild Steel Angle – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 1239 standard • Hot rolled or cold rolled ⸻ 2. Types of MS Angles • Equal Angle: Both legs are of same length • Unequal Angle: Legs have different lengths • Hot Rolled Angle • Cold Rolled Angle ⸻ 3. Size Range Equal Angles (L x L x Thickness) • 25 x 25 x 3 mm up to 150 x 150 x 20 mm • Standard lengths: 6 meters or 12 meters Unequal Angles (L1 x L2 x Thickness) • 25 x 20 x 3 mm up to 150 x 100 x 20 mm • Standard length: 6 meters Tolerance: • Length: ±5 mm • Thickness: ±0.3 mm • Width: ±0.5 mm ⸻ 4. Mechanical Properties (Typical for IS 2062 / Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 Good ductility and weldability. ⸻ 5. Surface Finish • Hot rolled: Matte grey • Cold rolled: Smooth finish • Can be painted or coated • ISI marked angles available for quality assurance ⸻ 6. Features • High strength-to-weight ratio • Easy to weld, cut, and fabricate • Uniform cross-section • Durable for construction and structural applications • Available in both standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports) • Bridges and industrial structures • Roof trusses and staircases • Conveyor frames and machinery • Fencing and grills • Electrical and telecommunication towers • General engineering and construction work

Mild Steel Beams – Specifications 1. Product Types MS beams are available in these sections: • ISMB – Indian Standard Medium Beam • ISLB – Indian Standard Light Beam • ISWB – Indian Standard Wide Flange Beam • ISHB / H-Beam – Heavy Beam (wide and heavy design) • I-Beam / Universal Beam – Structural applications ⸻ 2. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 • IS 2062 Grade E350 These grades give good weldability and strength. ⸻ 3. Dimensions (General Range) Depth (Height) • 100 mm to 600 mm (varies by beam type) Flange Width • 50 mm to 250 mm Web Thickness • 4 mm to 12 mm Flange Thickness • 6 mm to 20 mm Length • Standard: 6 meters / 12 meters • Custom cut lengths available ⸻ 4. Weight Range MS beams are sold by weight. Typical weight range: • 5 kg/m to 110 kg/m, depending on size and type. (I can also prepare a full size-wise weight chart if needed.) ⸻ 5. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: 23% minimum • Good ductility and weldability ⸻ 6. Features • Strong structural load-bearing capacity • Good weldability and machinability • Suitable for fabrication and construction • Durable and long-lasting even in outdoor conditions • Cost-effective compared to heavy alloy steels ⸻ 7. Applications • Building structures • Bridges and flyovers • Industrial sheds and warehouses • Machinery frames • Supporting columns and trusses • Shipbuilding and heavy engineering • Transport and equipment manufacturing

GP Pipe Specifications 1. Material • Mild Steel (CR or HR coil) • Electro-galvanized to prevent rusting • Coating is uniform and smooth 2. Manufacturing Standard • IS 277 (for galvanizing) • IS 1239 (for steel tubes – common in India) • Pipes may also follow ASTM A513 / A500 for structural grade 3. Surface Finish • Bright silver finish • Smooth and clean surface • Light zinc coating (not as heavy as Hot Dip GI) 4. Sizes Available Round Pipes: • Diameter: 12.7 mm to 165 mm • Thickness: 0.5 mm to 4 mm • Length: Standard 6 meters Square Pipes: • 12x12 mm to 150x150 mm • Thickness: 0.5 mm to 6 mm • Length: 6 meters Rectangular Pipes: • 20x10 mm up to 200x100 mm • Thickness: 0.5 mm to 6 mm • Length: 6 meters 5. Zinc Coating • Usually 80 GSM to 120 GSM • Electro-galvanized process • Light weight and economical 6. Properties • Good corrosion resistance • Easy to bend and weld • Lightweight compared to GI • Suitable for fabrication and indoor use 7. Applications • Furniture frames • Gate and grill fabrication • HVAC and ducting supports • Automobiles and cycles • General engineering • Indoor structures • Decorative applications Applications • Industrial flooring • Truck and trailer flooring • Staircases and steps • Ramps • Walkways • Platforms • Construction and fabrication work • Parking areas • Machine bases The raised pattern gives better traction and reduces slipping in wet or oily areas.

Foundation Bolts – Specifications 1. Material Grades • Mild Steel (IS 1363 / IS 1367) – Standard bolts • High Strength Alloy Steel (Grade 8.8 / 10.9) – Heavy-duty applications • Galvanized / Hot Dip GI – For corrosion resistance ⸻ 2. Types of Foundation Bolts • Anchor Bolt – Straight or bent (L-shape / J-shape) • Stud Bolt – Threaded on both ends • Full Thread / Half Thread Bolts • Chemical / Cast-in-place Bolts – Embedded during construction • U-Bolts – For pipe or structural supports ⸻ 3. Size Range • Diameter: M12 – M64 (standard) • Length: 150 mm – 3000 mm (depending on application) • Custom sizes available Thread: Metric coarse (ISO standard) or as per design ⸻ 4. Mechanical Properties • Tensile Strength (Grade 4.6): 400–500 MPa • Tensile Strength (Grade 8.8): 800–950 MPa • Yield Strength: 0.6 × tensile strength • Hot dip galvanized coating: 40–80 microns typical ⸻ 5. Features • High structural strength for building foundations • Resistant to vibration and dynamic loads • Corrosion-resistant coating available • Custom lengths and thread patterns available • Suitable for cast-in-place or post-installed applications ⸻ 6. Applications • Structural steel and columns • Industrial machinery foundations • Bridges and flyovers • Power plants and substations • Petrochemical and refinery plants • Heavy equipment anchoring

Mild Steel Beams – Specifications 1. Product Types MS beams are available in these sections: • ISMB – Indian Standard Medium Beam • ISLB – Indian Standard Light Beam • ISWB – Indian Standard Wide Flange Beam • ISHB / H-Beam – Heavy Beam (wide and heavy design) • I-Beam / Universal Beam – Structural applications ⸻ 2. Material Grade Most commonly supplied in: • IS 2062 Grade E250 (Fe410) • IS 2062 Grade E300 • IS 2062 Grade E350 These grades give good weldability and strength. ⸻ 3. Dimensions (General Range) Depth (Height) • 100 mm to 600 mm (varies by beam type) Flange Width • 50 mm to 250 mm Web Thickness • 4 mm to 12 mm Flange Thickness • 6 mm to 20 mm Length • Standard: 6 meters / 12 meters • Custom cut lengths available ⸻ 4. Weight Range MS beams are sold by weight. Typical weight range: • 5 kg/m to 110 kg/m, depending on size and type. (I can also prepare a full size-wise weight chart if needed.) ⸻ 5. Mechanical Properties (IS 2062 E250) • Yield Strength: 250 MPa • Tensile Strength: 410 MPa • Elongation: 23% minimum • Good ductility and weldability ⸻ 6. Features • Strong structural load-bearing capacity • Good weldability and machinability • Suitable for fabrication and construction • Durable and long-lasting even in outdoor conditions • Cost-effective compared to heavy alloy steels ⸻ 7. Applications • Building structures • Bridges and flyovers • Industrial sheds and warehouses • Machinery frames • Supporting columns and trusses • Shipbuilding and heavy engineering • Transport and equipment manufacturing

Mild Steel Sheets & Plates – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 513 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Thickness Range Sheets • 0.5 mm to 6 mm Plates • 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm ⸻ 3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available. ⸻ 4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 ⸻ 5. Surface Finish • Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻ 6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills

Mild Steel Sheets & Plates – Specifications 1. Material • Mild Steel (Low Carbon Steel) • Grade: IS 2062 / IS 513 / IS 1239 • Hot rolled or cold rolled ⸻ 2. Thickness Range Sheets • 0.5 mm to 6 mm Plates • 6 mm to 50 mm or higher Standard thicknesses: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 30 mm ⸻ 3. Standard Sizes • 1000 mm x 2000 mm • 1220 mm x 2440 mm • 1500 mm x 3000 mm (less common) Custom cut-to-size options available. ⸻ 4. Mechanical Properties (Typical for IS 2062 Mild Steel) • Yield Strength: 240–250 MPa • Tensile Strength: 410–540 MPa • Elongation: 20–25% • Hardness: HRB 60–80 ⸻ 5. Surface Finish • Hot rolled: Matte grey / mill finish • Cold rolled: Smooth finish • Can be painted, powder coated, or galvanized ⸻ 6. Features • Strong and durable • Uniform thickness and flatness • Easy to cut, weld, bend, and machine • Good corrosion resistance when coated or painted • Available in standard and customized sizes ⸻ 7. Applications • Structural fabrication (frames, supports, platforms) • Construction: bridges, buildings, and trusses • Industrial machinery and equipment bases • Fabrication of tanks, containers, and ducts • Shipbuilding and automotive parts • General engineering and heavy fabrication • Fencing, gates, and grills